How to Find and Fix Hot and Cold Spots

Service

If you discover that you have hot and cold spots in your Wisconsin Rapids home, you’re not alone. This is a fairly common issue. While it may seem like a big concern, the good news is that the common causes of hot and cold spots are normally easy to fix with a simple air conditioning service. The most common causes for hot and cold spots are:

  • Zero zoning or improper zoning
  • Poorly designed or ineffectively sized duct systems
  • Leaky or inadequately insulated air ducts
  • The wrong size of HVAC equipment

Lack of Zoning or Improper Zoning
A zoning system splits your home into separate areas, known as “zones,” and means you’re able to set the air temperature in each zone. The system uses multiple thermostats that operate dampers within the ductwork of your forced-air system. The thermostats are working nonstop, reading the temperature of their assigned zone, then open or close the dampers to meet the thermostat's settings. This might be the missing link to keeping that one frozen bedroom warm in the winter, or that hot box sunroom comfortable all summer. Plus, when you utilize it with a programmable thermostat, zoning can mean home energy savings of up to 35 percent.*

Poorly Designed or Ineffectively Sized Duct Systems
Some homeowners have hot and cold spots simply because their home’s duct system isn’t sized correctly for the area that needs heated and cooled, or it’s improperly designed. We find this is pretty normal in homes that were built before much of today’s tools and training were around. Unfortunately, even the most energy-efficient HVAC equipment can’t live up to homeowners’ expectations if the duct system isn’t permitting it to do its job. In fact, a poor duct system could actually cause new equipment to work more frequently than necessary and decrease its life cycle. The professionals at Rapids Sheet Metal Works Inc can help you decide if your duct work is working for your home.

Leaky or Inadequately Insulated Air Ducts
Even if your duct system is designed and sized appropriately for your home, it may still be at the root of your home’s hot and cold spots. It’s commonplace for the ducts in a home to become leaky over time. Professionals like Rapids Sheet Metal Works Inc can check your ducts and let you know if they ought to be sealed. They could also find that your ducts aren’t leaking, but they’re not properly insulated. Fortunately, this is also a fairly simple fix.

Improperly Sized HVAC Equipment
So possibly your air duct system is just fine and you have a good zoning system, but you’re still experiencing hot and cold spots through your home. Improperly sized HVAC equipment might be the culprit. A system that is too small has to run harder to heat or cool your home, which leaves hot and cold spots because it can’t take care of the amount of space it needs to condition. Even a system that’s too big can mean problems because it’ll cycle on and off too often to do its job properly.

No matter what’s the cause of the hot and cold spots in your home, Rapids Sheet Metal Works Inc can help. Just give us a call at 715-301-0256 and we’ll help you figure it out and decide if you need air conditioning service, or any other types of HVAC service that can help you keep your home comfy. 

 
 
*Source: U.S. Department of Energy statistics
Back To Blog